HOME > NEWS > Precautions for sealing strip installation

Precautions for sealing strip installation

2017-09-26 11:05:49   COMMENT:0 HITS:
    1: before installation, the sundries in the groove should be cleaned up. When the glass is placed, the gap between the two sides should be balanced, and the fixed, timely and correct collision prevention should be avoided, and the center of the slot should be deviated from the slot center.
    2: doors and windows sealing strip should not be too tight, the length of the material is longer than the assembly length of 2O-3Omm. Installation should be placed in place, with glass, glass notch close contact, the surface should be flat, so that the glass around the force evenly, and then the corner of the place with special glue firmly bonded.
    3: when using sealant to fix glass, it is better to extrude the glass into the rubber strip, leave the glue filling space, and the glue injection depth should not be less than 5mm. Before the glue is solidified, it is not suitable to move the glass, but to keep it stable.
    The above is the doors and windows sealing strip use and installation notes of some simple introduction, hope these introductions can bring some help to you.

Previous_page:Features of door and window sealing strip
Next_page:Main characteristics of sealing strip

<ALL>